Skip to main content


By August 5, 2022Medical Animation

Oculus Quest 2 IPD Settings – How to Estimate Them

oculus quest 2 ipd settings

For Oculus Quest 2 ipd setting, there are several things you need to remember. The distance between the two walls of the lenses might differ from the advertised distance. You’ll also need to account for the distance between the walls of the lenses themselves, which may vary from 60 to 59 ipd. In this article, we’ll take a look at some of the basic ipd settings and how to estimate them.

Getting Started With Ipd

Getting the most out of your VR experience starts with getting the right IPD settings. You can adjust the IPD on the Quest by pulling out the lenses. When you do this, an indicator will appear. The value will be in millimeters, and it will tell you how much the lens distances differ from your pupil spacing. It is important to set the correct IPD, or eye distance, for your particular eyes.

The IPD settings on the Oculus Quest 2 are expressed in ranges. If your IPD falls between 62mm and 65mm, then the default setting should be fine. If it falls between 58mm and 61mm, then sliding the lenses closer together should help. If your IPD falls outside this range, it may be difficult to see an image clearly. You may need to adjust the lenses further apart or try a wider range.

The Oculus Quest headset comes with three IPD settings. If you are having trouble adjusting the lens spacing, you may need to adjust the top strap first. If the top strap doesn’t sit securely on your head, you can adjust it by pulling it through the front strap. Then, move the lens left or right to make the adjustment. Make sure to use a ruler to measure the distance between the two lenses.

Setting Distances

The Oculus Quest headset comes with electronics that measure IPD. You can adjust the distances between the two displays to suit your eyes. There are three settings for IPD. To check which distance works best for you, try putting on your glasses and performing an eye test. Otherwise, you can just move the slider on your Quest. The Quest is easy to use, but you might need a little help getting used to the different distances.

IPD, or interpupillary distance, is the distance between each center pupil. It affects your vision clarity and depth perception. To make the best use of VR, you need to position the lenses so that each pupil is aligned with the center of the lens. Though there are default settings that work for most people, you might want to experiment with the recommended distances for your own eyes.

The default setting for IPD on the Quest headset is between 62 and 65 millimeters. If you need to adjust IPD for your glasses, you should slide the lenses apart or closer to one another. Setting distances for the Quest headset is best left to a professional, but don’t be afraid to experiment with other settings. It can be nerve-wracking to push on the lenses.

Estimating Ipd On Oculus Quest 2

The Oculus Quest is a VR headset released on October 24th, 2019. The device has received a number of software updates since launch, including Passthrough+, which improved the passthrough view and visuals. Further, the device is expected to get PC tethering and hand-tracking in the future. Most likely, a future update will include an IPD indicator for optimal visual fidelity.

Although there’s no digital IPD setting in the Quest, there are several ways to estimate it. The Quest comes with electronics to measure IPD. It’s important to understand the settings on your headset to get the best experience. The default settings in the Quest are adequate for most players. However, for the most accurate answer, you should seek the advice of a medical professional.

The first option is to measure the distance between the lenses in the Oculus Quest by using a ruler. This will give you an idea of how much distance you need to adjust the IPD. However, this method can be less accurate than using the Oculus Quest’s built-in IPD slider. Try focusing on a piece of text in the center of your field of view and open a VR screen with text on it. Take note of the IPD settings you use and repeat until you can clearly see the image in both eyes.

Our Services

Want to know how we can help?  Have questions? Have a project to discuss? Message us using the contact form below, email us at [email protected] or call us at (512) 591-8024 to meet with a member of our team today.