Skip to main content


By June 25, 2022July 17th, 2022Medical Animation

How to Measure IPD Using a Ruler

how to measure ipd

If you don’t have a mirror handy, then you can use a ruler to get the exact measurement of your IPD. If you can’t find a mirror, you can still get the measurement using a ruler. Otherwise, you can measure your IPD by eye. We will cover the best tools to measure your IPD. However Want to know how to measure ipd?, there are some common errors you can make. Here are some things to keep in mind.

EyeMeasure _ How to measure IPD

The first step in measuring IPD is to find out how big your pupils are. To do this, hold a measuring device near your nose, with the edge of the ruler running directly underneath both eyes’ pupils. To measure one eye, close it while looking at the other. Move the ruler to the center of the left pupil and repeat the process for the other eye. Once you have the proper distance for both eyes, you can then compare the measurements.

ANVIS 9 _ How to measure IPD

An ANVIS is not an approved night vision device for use on aircraft. However, if you wish to use this instrument for military or commercial purposes, you must follow a few guidelines. First, the ANVIS must be serviced by an avionics manufacturer (AVIM). They perform PMCS, system current drain test, collimation check, and PUgging. This service will also include filling the ANVIS MONOCULAR with dry nitrogen and PUgging. Finally, the ANVIS MONOCULAR should be sealed against moisture and dust to prevent degradation of optical performance.


If you’re thinking about getting a VR headset and want to know how to adjust the Inter-Pupillary Distance (IPD), then this article is for you. The IPD measurement is one of the main factors determining the comfort of a VR headset. Fortunately, Pitool makes it easy to do. Pitool works with Steam VR, as well as the Oculus Store. Importing software into Pitool is simple, and you can toggle on or off Parallel Projection for any game. Using Steam VR, the experience is seamless.


The first step in determining the IPD is determining the correct eye position. This measurement is easy. Hold the ruler at an appropriate distance from the eyes and observe the eye movement. If the eye movements are too rapid or too slow, the IPD is too high. A proper eye position will help you choose the right VR headset. Here are some tips to measure the IPD correctly. Using a ruler will make the measurements easier.


The Rockwell-Collins method for measuring IPD is a reliable test with high ICC and CA values. Its accuracy can be judged by its calculated SEM, ICC, and CA values. ICC is a measure of test-retest reliability. Its level should be greater than 0.7 to indicate excellent reliability. The accuracy level of ICC is also acceptable.

VR Headsets

To get the best VR experience possible, you must have the correct IPD for your VR headset. IPD is the distance between the centers of the eyes. It is important to use lenses that are close to this distance when wearing VR headsets, but they should also be close enough to allow you to see clearly in the virtual world. Humans have an average IPD of 64mm, so you must match your IPD to the IPD support on your VR headset.

Dual PD

When determining whether you have dual PD, you need to know how to measure the distance from the center of each pupil to the bridge of your nose. This measurement is often written as 33/31, with the left number representing the left eye and the right number representing the right eye. You can also measure the distance between the center of the pupils of both eyes to find out which is the most correct reading. The most accurate way to measure dual PD is to go to an optician and get a measurement for your eyes.

Measuring Ipd With Eyeglasses

Your eye doctor may tell you to measure your pupillary distance (PD), but how do you do it yourself? If you don’t have an eyeglass prescription, you can measure it yourself at home using a millimeter ruler and a mirror. Stand about 12 inches away from the mirror and position the ruler flat against your eyebrows. Line up the zero mark on the ruler with the center of your left pupil. Then, close your left eye and open your right one.

Our Services

Want to know how we can help?  Have questions? Have a project to discuss? Message us using the contact form below, email us at [email protected] or call us at (512) 591-8024 to meet with a member of our team today.